home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Plus 1995 #5 & #6
/
Amiga Plus CD - 1995 - No. 5 and 6.iso
/
pd
/
grafik
/
lightwave
/
lwml9505.txt
/
000324_owner-lightwave@webcom.com_Thu May 25 23:33:36 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-06-03
|
2KB
Received: by webcom.com
(1.37.109.15/16.2) id AA041060016; Thu, 25 May 1995 23:33:36 -0700
Return-Path: <owner-lightwave@webcom.com>
Received: from cello.QNET.COM by webcom.com with SMTP
(1.37.109.15/16.2) id AA041000012; Thu, 25 May 1995 23:33:32 -0700
Received: by cello.QNET.COM (Smail3.1.28.1 #1)
id m0sEt4x-0003pZC; Thu, 25 May 95 23:41 PDT
Date: Thu, 25 May 1995 23:41:02 -0700 (PDT)
From: Manuel Coats <mcoats@qnet.com>
X-Sender: mcoats@cello
To: John Gross <jgross@netcom.com>
Cc: lightwave@webcom.com
Subject: Re: Stencil
In-Reply-To: <Pine.3.89.9505252257.A23090-0100000@netcom4>
Message-Id: <Pine.SV4.3.91.950525233641.28617C-100000@cello>
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-lightwave@webcom.com
Precedence: bulk
On Thu, 25 May 1995, John Gross wrote:
> Remember, if you are just stencilling fonts onto polys, there's no need
> to extrude the font. By using Drill (not Solid Drill) you can stencil (or
> any of the other operations) along any axis. The stencil fonts don't even
> have to be touching the "cutee". Of course, if you are stenciling into
> something not lined up on X, Y or Z, then you would want to extrude and
> intersect like Joe mentioned...
> JG
This is not entirely correct. By doing the above, the cutee would be
stenciled though the entire object. If you only want the logo stenciled
on one side of the object you will need to use the extruded cutee and
use solid drill.
Manny
--
Manuel Coats <mcoats@qnet.com> sent this message.
To Post a Message : lightwave@webcom.com
Un/Subscription Requests To : lightwave-request@webcom.com
(DIGEST) or : lightwave-digest-request@webcom.com
Administrative Items To : owner-lightwave@webcom.com